Outdoor flags
Showing all 9 results
-
-
Drapeaux extérieur, Outdoor flags, Signage
Car flag
Car flag in polyester fabrics 110 grs / m2
The flag is flame retardant.
Sublimation printing, machine washable at 30 °.
Four-color or direct pantone printing.Two printing options :
- Front printing (the back is mirrored by transparency)
- Front AND back printing (identical or different visuals)
Flag size : 35 x 24 cm
SKU: M-DRAPEAU-VOITURE -
Drapeaux extérieur, Outdoor flags, Signage
falco-rectangle-oriflamme
Flag with aluminum pole PRO – diameter 25 mm rectangle shape
Two options to choose from:
1) Standard flag printed with sublimation on 115g polyester fabric, front and back printing can be seen in transparency. TUCAN shape
2) Double double-sided flag (independent graphics on both sides, identical or different) – printed with UV LED on 350gr blockout fabric. TUCAN shape
- Option 1 or 2 sides
- Mast made of aluminum tubes with a diameter of 25 mm
- Hook for attaching the flag at the bottom
- Wind resistance tested up to 29 km / h
- Pole for the mast
Sizes available:
- Size Small – Ground height: 2,7m – Flag size: 220 x 74 cm
Weight: 1,2 kg – Front / back weight: 1,7 kg - Size Medium – Ground height: 3,3m – Flag size: 270 x 74 cm
Weight: 1,5 kg – Front / back weight: 2,1 kg - Size Large – Ground height: 4,3m – Flag size: 370 x 74 cm
Weight: 2 kg – Front / back weight: 2,7 kg
You can choose the feet on this page.
SKU: K-Oriflamme-rectangle Falco -
Drapeaux extérieur, Outdoor flags, Signage
Flag with telescopic pole 7 meters
Telescopic pole with flag size 120 x 300 cm
The mast is telescopic, its height can be adjusted to a maximum of 7 meters,
Includes: removable base to fill with water or sand,
Four-color printed flag,
Made of 100 polyester fabrics% of weight 115 grs / m²,
Printing is done by four-color sublimation on the front and the back is visible in transparency,
Sewn hem, reinforcement tape and eyelets (4 at the top and 9 at the side)
Comes with carrying bag.
SKU: AD-drapeau-mat-tel -
Drapeaux extérieur, Outdoor flags, Signage
Oriflame / Windflag Caspia
Windflag rounded at the top and rectangle at the bottom. Fiberglass mat.
Four-color printing on flame retardant polyester 110 grs / m2 front. The back can be seen transparently.
Wind resistance up to 29 km / h
Several options possible for the feet and transport bag: click here.
Sizes available:
- Size Small – Ground height: 2,9 m – Flag size: 194×49 cm
Weight: 0,70 kg
- Size Medium – Ground height: 3,4 m – Flag size: 254×59 cm
Weight: 0,80 kg
- Size Large – Ground height: 4,5 m – Flag size: 339×79 cm
Weight: 1,10 kg
- Size X-Large – Ground height: 5,6 m – Flag size: 379×84 cm
Weight: 1,40 kg
You can choose the feet on this page.
SKU: K-Oriflamme-Caspia - Size Small – Ground height: 2,9 m – Flag size: 194×49 cm
-
Drapeaux extérieur, Outdoor flags, Signage
Oriflamme / Windflag Larrus
Windflag rounded at the top and bottom. Fiberglass mat.
Four-color printing on flame retardant polyester 110 grs / m2 front. The back can be seen transparently.
Wind resistance up to 29 km / h
Several options possible for the feet and transport bag: click here.
Sizes available:
- Size Small – Ground height: 2,9 m – Flag size: 194×49 cm
Weight: 0,7 kg
- Size Medium – Ground height: 3,4 m – Flag size: 254×59 cm
Weight: 0,8 kg
- Size Large – Ground height: 4,5 m – Flag size: 339×79 cm
Weight: 1,1 kg
- Size X-Large – Ground height: 5,6 m – Flag size: 379×84 cm
Weight: 1,4 kg
You can choose the feet on this page.
SKU: K-Oriflamme-Larrus - Size Small – Ground height: 2,9 m – Flag size: 194×49 cm
-
Drapeaux extérieur, Outdoor flags, Signage
Oriflamme / Windflag premium Tucan
Flag with aluminum pole PRO – diameter 25 mm
Two options to choose from:
1) Standard flag printed with sublimation on 115g polyester fabric, front and back printing can be seen in transparency. TUCAN shape
2) Double double-sided flag (independent graphics on both sides, identical or different) – printed with UV LED on 350gr blockout fabric. TUCAN shape
- Reinforced scabbard with black elastic band.
- Option 1 or 2 sides
- Mast made of aluminum tubes with a diameter of 25 mm
- Hook for attaching the flag at the bottom
- Wind resistance tested up to 29 km / h
- Transport pouch for the mast
Available sizes:
- Size Small- Ground height: 2.5 m – Flag size: 60 x 200 cm
Weight: 1.3 kg – Front / back weight: 1.6 kg - Size Medium – Ground height: 3.35 m – Flag size: 65 x 260 cm
Weight: 1.6 kg – Front / back weight: 2.2 kg - Size Large – Ground height: 4.25 m – Flag size: 85 x 340 cm
Weight: 2.1 kg – Front / back weight: 2.8 kg - Size X-Large – Ground height: 5 m – Flag size: 90 x 390 cm
Weight: 2.1 kg – Front / back weight: 2.8 kg
You can choose the feet on this page.
SKU: K-Oriflamme-premium-Tucan -
Drapeaux extérieur, Outdoor flags, Signage
Oriflamme / Windrop Albatross
Windrop (teardrop-shaped banner) rounded at the top. Fiberglass mat.
Four-color printing on flame retardant polyester 110 grs / m2 front. The back can be seen transparently.
Wind resistance up to 29 km / h
Several options possible for the feet and transport bag: click here.
Sizes available:
- Size Small – Ground height: 2,9 m – Flag size: 76×176 cm
Weight: 0,8 kg
- Size Medium – Ground height: 3,5 m – Flag size: 96×223 cm
Weight: 0,9 kg
- Size Large – Ground height: 4,5 m – Flag size: 121×290 cm
Weight: 1,2 kg - Size Large XL – Ground height: 4,5 m – Flag size: 138×365 cm
Weight: 1,5kg
You can choose the feet on this page.
SKU: K-Oriflamme-Albatros - Size Small – Ground height: 2,9 m – Flag size: 76×176 cm
-
Drapeaux extérieur, Outdoor flags, Signage
Windflags / Oriflammes Accessories
Oriflammes Accessories
- Platinum – Square Base 4 kg
Made of steel. 30×30 cm. Application: indoors (recommended outdoors with a buoy). Can be used on all surfaces with S and M flags. Hollow handle makes it easy to carry. As standard, the plate is supplied with a pivot which can be replaced by a Rotary System. - Platinum – Square Base 6 kg
Made of steel. 35 x 25 cm. Application: indoors (recommended outdoors with a buoy). Can be used on all surfaces with S and M flags. Hollow handle makes it easy to carry. As standard, the plate is supplied with a pivot which can be replaced by a Rotary System. - Platinum – Square Base 8 kg
Made of steel. 42 x 42 cm. Application: indoors (recommended outdoors with a buoy). Can be used on any surface with S, M and L flags. Hollow handle makes it easy to carry. As standard, the plate is supplied with a pivot which can be replaced by a Rotary System. - Platinum – Square Base 12 kg
Made of steel. 49 x 49 cm. Application: indoors (recommended outdoors with a buoy). Can be used on all surfaces with with S, M, L and XL flags. The hollow handle makes it easy to carry. As standard, the plate is supplied with a pivot which can be replaced by a Rotary System. - Rotary system
Diameter 16.5 cm – 0.45 kg For use in bases such as: plates, flat cross, vehicle base. Through the use of a rotating system, the mast will rotate freely in the direction of the wind. - Flat cross base
Made of a steel profile. Powder coated. 60 x 53 cm – 2.3 kg. Application: indoors (recommended outdoors with an additional buoy).
For use on all surfaces with S and M flags. - Tubular cross base
Made of a steel profile. Powder coated. 82 x 70 cm – 1.6 kg. Application: indoors (recommended outdoors with an additional buoy).
For use on all surfaces with S, M, and L flags - Buoy
A 50 cm diameter water bag for an additional weight of the bases. After being filled with water, it reaches a weight of up to 10 kg.
Works especially well with large flags. - Water tank base
Plastic base 45 x 45 x 115 cm. to be filled with water or sand. Application: indoors and outdoors on all surfaces. Capacity: 26 liters. Fits S and M flag poles. - Standard steel point
Made of steel, it has a system rotary. For outdoor use on moderately soft ground such as lawn or sand. Application: Suitable for S and M flag poles. - Reinforced steel point (double point)
Made of steel with a shiny silver finish, it has a system rotary. The base has an extra tip to prevent the base from rotating and destabilizing.
For outdoor use on moderately soft ground such as lawn or sand. Application: suitable for flag poles S, M, L and XL. - Screw base
Made of plastic, it has a system rotary. It works well outdoors, for mounting poles on grassy or sandy surfaces. It has practical handles and folding that will help screw the base to the ground. For use with 2.8 and 3.4 m masts. - Vehicle base
Metal base functioning as an access ramp for a car wheel. Made of solid metal alloy. The base comes with a mast pin as standard. (possibility of adding a rotary system). Application: outdoor and indoor .. It can be used on any surface with S, M, L and XL flags - Wall base – 45 ° with rotating system
Allows the masts to be fixed to the wall, suitable for flag poles S and M. It has holes for screws. Set does not include pins and screws
of fixation. - Base for wall or floor – 90 ° with rotating system
Rotary system integrated into a cast iron plate which has openings for fixing the base to a hard surface. Fits S and M flag poles.
The set does not include pins and fixing screws. - Transport bag
Polyester cover to wrap the set: pole and flag. Available in short format for S, M flags, and in long format for L, XL flags.
SKU: K-Accesoires-Oriflammes - Platinum – Square Base 4 kg
Personalized flag and advertising banner for an outdoor exhibition
An indoor or outdoor advertising flag or flame is a very effective device for promoting a brand or company. These promotional banners are personalized to your liking. With its tall shape, a flag can be a challenge to erect a notoriety. A flag is a simple but effective communication solution.
The ideal installation for an advertising flag is outdoors, it provides great impact and visibility thanks to the resistance of the sail and the large printing surface, printed in high definition.
Take advantage of the skill of our team and our experience which is available to our customers by providing good value for money. Just a few clicks to create your own outdoor flag.
What are the contributions of advertising flags?
One of the main reasons for using a outdoor flag is its flexibility. This communication medium can be used wherever you need it and can be installed anywhere, making it an ideal choice for outdoor advertising. A feather flag is a great design if you want to draw attention to a particular location.
The other advantage of opting for an advertising flag is its low cost. In addition to its lightness, its inexpensive price sets it apart from other supports. Which means this product won’t ruin your wallet. The use of this flag allows you to promote your sales, events or brands. If you’re looking to create a visually impactful advertisement, consider the custom banner.
Advertising flags are ideal for retail locations as they easily convey your brand message. You can customize the flag with your logo and slogan, and it is durable and can withstand harsh weather conditions (winds, rains, snows). It can also increase the visibility of your color. Also, they are very effective in communicating your company’s strengths, key selling points and other characteristics. One outdoor flag is created to attract potential customers.
A multitude of outdoor flag choices for your visibility
At Abcprint, you will discover a wide choice of flags perfect for outdoor displays. Several shapes, formats, colors are available. Choose what suits you best, for example:
– Flag for car: the fabric veil is in polyester 110 grs/m². The flag is fireproof. This flag is printed on the front alone or on the front and back in four colors with sublimation inks or direct pantone and is machine washable at 30°. The size of the flag is 35 x 24 cm.
– Advertising flag with telescopic pole: the height of the pole measures 7 meters. To guarantee the stability of the flag, a removable base to be filled with water or sand is included. The printing of the flag is four-color on the front and the back is transparent. Sailing in 100% polyester weighs 110 grs/m². The finishes of the flag are Sewn hem, reinforcement tape and eyelets. Packed in a carry bag upon delivery.
– The Oriflamme / Windflag Tucan: with PRO aluminum mast – diameter 25 mm. Two options to choose from: standard flag printed with sublimation on the 115g/m² polyester sail, front printing and the back is seen in transparency or Double double-sided flag (independent graphics on both sides, identical or different) – printed with UV LED on fabric blockout 350gr. Available sizes are small, medium, large and x-large.
– Windflag / Advertising Oriflamme accessories: square base plates from 4 kg to 12 kg, a rotating system, a flat cross foot, a tubular cross foot, a buoy, a water tank base, a standard steel tip , a reinforced steel spike, a screw base, a screw base, a wall base – 45° with rotary system, a wall or floor base – 90° with rotary system, a carrying bag.
There are many of them on our site, therefore, visit https://abcprint.shop to find out more.
Create your outdoor flag in just a few clicks
You can order your outdoor flag (classic flag, trapezium banner, drop of water, rectangular) on our online sales site. Click on the product and complete the contact form. Our team will send you a quick feedback. If the estimate suits you, you can send us a vector file containing your logo, your slogan, or advertising messages. We then make a template. If it’s ok, we will go directly to the materialization of your order.